One owner DP-62L purchased in 1983 from Denon dealer. Available in original box with all original documents.
Table was completely recapped in 2010. The main bearing was replaced by an Applied Fidelity ceramic/jewel bearing and all metal work was completely machined to better than new condition. The stock Denon tonearm has been replaced by an OEM RB-300 tonearm with Incognito wiring and the stock counterweight has been replaced by a Michell Technoweight.
The tonearm is mounted on a custom Acrylic arm board via a Riggle VTAF. You get a top quality direct drive Turntable with an optimized Rega RB-300 Tonearm plus VTA on the fly. End of LP tonearm lift is taken care of by a QUp tonearm lifter...included.
The platter mat has been replaced by a Herbies Way Excellent II mat. The dust cover is damped with sorbothane sheeting and sorbothane has been applied to the underside of the plinth.
Upgrades:
1) Electronics fully recapped in 2010
2) Rega RB-300 tonearm
3) Incognito wiring
4) Michell Technoweight
5) Applied Fidelity Ceramic/Jewel main bearing
6) Herbies Way Excellent II mat
7) Sorbothane damping under the plinth
8) Additional shielding beneath the tonearm, under the plinth
9) Sorbothane damping on the inside rear surface of the dust cover
10) QUp end of LP tonearm lifter
Shipping to continental US ONLY.
Shipping via Fedex only.
Paypal only.
Disclaimer:
The plinth is cosmetically perfect except for one ding that was an accident many years ago (see photo). The dust cover has cracks around the metal mounts, on the rear of the dust cover, that were repaired. The dust cover also has some minor light scratches on the top that can be polished out.
