I think that the parts are from a HW-19 Junior, based on what I can find on the internet. I don't know for a fact. If you have in interest in any of the parts, please look at the pictures and feel free to ask questions.NOTE: I do not guarantee that the parts are from a VPI HW-19 Junior, nor do I guarantee that they will be suitable for your purpose. Parts are assumed to be used. All sales are final. No refunds. 1. Acrylic Cover - No scratches or cracks. Hinges work with hand pressure. There does appear to be marks that may be from the plastic bag that it was stored in. It is unknown if they will polish out, but they are not noticeable except under certain light and angles. SOLD 2. Plith - 1-inch MDF (I think) drilled as shown in the picture. Corners are good except for one that is very slightly rounded and missing a little finish. There is a scratch from the back left motor mounting hole running to the back edge. Likely won't be seen if the motor cover is installed. The two back motor mounting holes are also slightly elongated, which may explain the scratch at the left one. SOLD 3. Spindle - Spun okay when I mounted the platter on it and spun it by hand. Tapered to match the hole on the platter. SOLD 4. Platter - Looks okay. Tapered spindle hole. About 0.75-inch thick at the edge and weighs 3-4 lbs. SOLD 5. Motor Cover Plate - Looks good. No discernable marks on face. Scrape on back side, going from one of the mounting holes to the edge. Not visible from front and should not affect use. SOLD Prices do not include shipping and packing materials. Shipping only to US addresses only. Payment by Paypal + 3% or US Postal Service Money order.
|