Have been on a back-order status for several months but catching up so will be shipping those early October. Place your order now to get yours confirmed!Over 6800 Vibraplanes sold world-wide and we still have a back-order of them! Thank you all for your support. Yes we have been producing the Vibarplane for over 30 years now and it's still considered the reference of all isolation products. All Vibrplanes are now being offered DIRECT! Save thousands.
With over 6,800 Vibraplanes sold world-wide we must have done something right! Based on the recent demand we now have a 4-5 week back-order of all units!!!! But the wait is worth it. Both Vibraplane (passive & active) tables are sonically identical as they isolate any component placed on them down to 2.5 to 3 HZ. The active table (2212) requires a compressor to supply a constant air supply to keep it floating. The passive model (2210) uses a hand pump to "float" the component. The passive model, once set, should stay at its proper inflation for many weeks without needing adjustment, depending on the weight of the component placed on it. The table will hold up to 275 pounds. The entire 24" x 20" surface of the top plate is flat and unobstructed, allowing plenty of room for any turntable. The top plate is constructed of a half inch plate of "Vibradamped" steel, which is covered with a Formica top skin and formed by two layers of steel of varying thickness, bonded together with a damping adhesive to minimize any resonance. To provide additional mass, a 10" x 14" x 1-1/4" piece of steel is welded to the bottom which is concealed, along with the three pneumatic isolators, by a 2" x 1/8" thick decorative skirt attached vertically to the outer perimeter of the top plate. The top platform is isolated by three patented, pneumatic isolators using a special bladder sealed in an airtight piston housing, each connected to a supplementary air chamber that improves real-time damping of periodic and random vibrations in the vertical plane. Horizontal isolation is provided largely by a series of special, highly compliant elastomer discs separated by thin, hard spacers. This portion of the isolator is located under the vertical air piston and moves side to side as efficiently as the pneumatic portion responds vertically. The elastomer sandwich operates as a variation of the bearing slip-plate concept for horizontal motion. As for the sound, well the qualitative enhancement is simply stunning. Sonic presentations take on new life. Spatial characteristics, such as hall space, are much more realistic. A feeling of cohesiveness is imparted to the whole presentation. With the Vibraplane under a given component, a new experience will await you.
| 
