Audio Electronic Supply SixPac Mono Amplifiers For local pick up only. Please no offers for trades and the price is firm. Cash paid at the time of pick up. If you have any questions or would like to comment on my modifications feel free to email me. Comes with tubes, original power cord and bias connector with wire but no meter.The following modifications were done: Both binding posts were changed to the Cardas long Copper/Rhodium long
binding posts. The 8 ohm 4 ohm selector switch was removed and replaced by
a Cardas binding post so that the output transformer wires are soldered
directly to the binding posts. The AC power inlet was replaced by a Furutech copper/gold plated inlet. Bias adjustment knob nut and washer was replaced with gold plated parts. In
addition, a gold plated brass knob by Audio Note was added. The knob is
secured so as to prevent accidental turning after Bias has been set. RCA jack replaced with a WBT 0201 RCA female chassis mount jack ¼” Bias Jack nut and washer replaced with gold plated units. XLR socket replaced with a Cardas CM F XLR. The red LED indicator light was replaced by a blue one. The “feedback” selector switch wires were removed Internal Modifications: Coaxial input wire on the RCA and XLR connector replaced with VH Audio
Pulsar 24 gauge solid silver Coax. All 0.1 uF caps replaced with V-Cap TFTF series Teflon® Film and Tin Foil
capacitors 1 uF Cap replaced with Mundorf Silver Oil Supreme 1 Mundorf M-Lytic AG Series electrolytic cap Two electrolytic caps replaced with Dueland caps 2.0 uF bypass cap in power supply replaced with a higher grade Solen SE
part. The two carbon 56K resistors replaced with AMRG brand resistors Internal AC wire replaced with 16 gauge Neotech brand Solid core UPOCC
Copper in Teflon. I removed the diodes and built a new Fairchild Stealth board. (My personal
favorite upgrade)! All input resistors replaced with Vishay naked" Z-FOIL resistors and
Caddock MK 132 resistors are on the ground connections. Replaced the two Jenson .22 uf caps with Duelund Alexander caps.
Cardas solder used throughout, all connections including tube sockets
cleaned with ProGold contact cleaner. All solder joints inspected and
repaired as needed.
|