After hearing this integrated I loved the sound and simplicity so much I bought it to replace my JRDG separates. I was so happy with it that I thought this would be the last amp/preamp I'd ever own. The only reason I"m selling it is because a friend decided to sell everything he owned and retire in Costa Rica . He offered me his 2 year old Continuum S2 for a price I couldn't turn down. The Concentro operates perfectly, And looks great and only has 1 tiny scratch that can only be seen from less 2-3 ft under really bright direct light. The remote had a good size crack in it when I got it. I braced it with steel from inside and used quality plastic epoxy when I repaired it so it works perfectly and is stronger than new. It also will come with a good 8ft or 3ft power cord (your choice) I am asking $3000.00 (add 3% for paypal) Audiogon Blue Book lists the range of these used from $4440 to $3500
--- It will very well packed,shipped fully insured/signature required by FedEx anywhere in the lower 48 USA for $75 (or less if my cost is lower) --- Please contact me for cost to Alaska or Hawaii. --- Sorry, I will only ship to US addresses --- Local pickup is preferred and free.
--- If you have any questions feel free to call me --- 865-816-2430 or "E" me here Output Power, Continuous RMS 250 watts @ 8 ohms, 500 watts @ 4 ohms
Frequency Response 5 Hz – 70 kHz, -3 dB @ 8 ohms
Gain Structure Preamp Section 20 dB, Amp Section 27 dB
Peak Output Current 35 amps
Dynamic Range 117 dBa
THD + Noise, 0.1 watts – 500 watts, 4 ohm < .05%, typically .006% @ 1 kHz
Load Impedance Range 2 ohms – 16 ohms
Input Impedance 40k ohms Balanced or Unbalanced
CCIF Intermodulation Distortion, 19/20 kHz < .002%
Damping Factor @ 1 kHz > 1000
Common Mode Rejection Ratio > 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting, Pin 2 Positive
Inputs 2 pair Balanced (XLR)
1 pair Balanced Unity Gain (Bypass)
3 pair Unbalanced (RCA)
Outputs 2 pair Balanced (XLR) Line Level
1 pair CE-Approved Binding Posts
Power Consumption Idle – 22 watts, Maximum – 1000 watts
Amplifier Weight 26 lbs. / 12.1 kg
3.2” x 17.3” x 13.9”
Overall Amplifier Dimensions (H) x (W) x (D)
80mm x 440mm x 353mm
Boxed it weighs in at about 35 lbs.
|