I am selling my Jeff Rowland Continuum 500 amp. The unit sounds wonderful with the Jeff Roland signature sound and it looks beautiful. The entire chassis of the Continuum is milled from a solid, massive block of 6061 aluminum to provide a vibration-free and EMI resistant enclosure for sensitive audio circuitry.
Features: •Two pairs XLR input connectors for balanced system configurations.
•Two pairs RCA input connectors for unbalanced system configurations.
•One pair high current, balanced line level outputs plus one pair RCA unbalanced outputs to allow for driving of multiple amplifiers for bi-amplification, subwoofers, etc.
•Fully-balanced inputs provide universal compatibility with other components and eliminate ground loop noise and EMI.
•Fully-balanced topology implemented in both input and output circuitry.
•Bypass function allows for transparent use in combination audio/home theater systems.
•Low noise, high-current, switch-mode power supply provides highest performance at any world-wide mains operating voltage.
•Low power consumption permits constant power-up operation to eliminate warm-up time.
•Optical encoder type volume control maintains quiet, trouble-free performance and accuracy over the entire lifetime of the product.
•Dual range volume control allows large volume level changes when knob is rotated abruptly, yet allows small, precise volume level changes when knob is rotated slowly.
•Six function, hand-held infrared remote control.
•Ultra-low resonance, structurally rigid chassis, precision-machined from solid blocks of aircraft grade 6061-T6 aluminum billet to provide a vibration-free and EMI resistant enclosure for sensitive audio circuitry. Specification:
Output Power, Continuous RMS watts,
both channels driven
500 watts @ 8 ohms per channel
1000 watts @ 4 ohms per channel
Frequency Response 5 Hz - 45 kHz, -3 dB @ 8 ohms
Peak Output Current 40 amps
Dynamic Range 120 dBa
Load Impedance Range 3 ohms -16 ohms
Input Impedance 48 k ohms
THD and Noise, < 0.1%, Typically .01% @ 1kHz
Dampening Factor >1000
Gain Structure Amplifier Section 26 dB
Volume Control Range 99.5 dB
Volume Control Resolution 0.05 dB Over Entire Range
Common Mode Rejection Ratio > 85 dB, 20 Hz to 20 kHz
Inputs
2 pair Balanced (XLR), 2 pair Unbalanced (RCA)
1 pair Unbalanced (RCA), Unity Gain (Bypass)
Outputs
1 pair Balanced (XLR), 1 pair Unbalanced (RCA)
1 pair CE-Approved Speaker Wire Clamp
Power Consumption Idle - 35 watts, Max - 2000 watts
Power Supply
Switch Mode (SMPS) / Switch Mode (SMPS) with active power factor correction
(PFC) and universal AC input voltage
Amplifier Weight 44 lbs. / 20 kg
Overall Amplifer Dimensions (H) x (W) x (D) - 5.3” x 15.5” x 15.6” (135mm x 394mm x 396mm)
|
| Payment and Shipping |
| Pay By: |
Personal Check after it clears, Money Order/Certified Check |
| Ship Weight: |
50 lbs. |
| Ships From: |
Bangkok, Thailand |
| Ships To: |
WorldWide |
| Shippers/Payer: |
UPS, FedEx, Postal / Paid by: Buyer |
| Shipping Notes: |
Ships to worldwide by International Expedited shipping actual cost. International Tracking provided.
|
|
|
