This is a very good condition Marantz SA11S2 (there's a very light scratch towards the back of the top panel, not very noticeable), with the Underwood Level-2 modifications. I'll be posting photos a little later. In the meantime, please feel free to ask questions, propose offers, etc. Here's a list of the modifications performed:The following details the Level-2 modifications for the Marantz SA-11S2 CD/SACD Player [$1,750 + freight to your player]:
27 x BlackGate STD, FK, N and PK-grade power supply and output coupling capacitors
2 x Rel-Cap Teflon TFT film and foil coupling caps bypass the main BlackGate output caps
12 x 1% polystyrene film and foil capacitors in the analog filter stage
52 x Riken Ohm ½ and one watt 1% carbon comp. resistors with gold-plated leads in the signal path
12 x Telefunken SF4007 Ultra-Fast Soft-Recovery Diodes replace/rebuild the bridge rectifiers. These are used in the sonically critical power supply positions.
1 pair of premium machined DH Labs direct gold plated over copper body Teflon insulated RCA female jacks are used on the outputs. These replace the cheap stamped stock modules.
4 x large EAR brand Sorbothane isolation feet with new mounting hardware
2 x sheets of SoundCaot chassis damping material cut and applied where applicable to control chassis resonances
1 x sheet of ERS suppression cloth to reduce EMI/RFI
4 feet of DH Labs 99.999% pure solid-core long-grained silver output signal wires w/foamed Teflon tape wrap dielectric, are added to the output jacks
1 x Acme Audio Labs silver-plated cryogenically-treated IEC power inlet replaces the cheap connector of the stock player
WBT high silver content (4%) solder used throughout
9 hours labor
|
