The German bFly audio 4TUBE absorbers are specifically designed for Tube Amplifiers.
The 2. Generation now available with screws.
The effectiveness of the 4TUBE Series
The transformers of Tube Amplifiers produce by nature mechanical vibrations and so disturb the flow of signals within the internal boards, cables, electronic components and especially the sensitive tubes.
The 4TUBE absorbers are designed for this weak points of tube amplifiers
The result:
The sound is more relaxed, spacial and natural
[4TUBE Oberseite]
Our alternative for solid state amps and loudspeakers
Screwable version: with screws M4/M6/M8 or inner thread M4/M6
The effectiveness of the 4TUBE variant:
The transformers of Tube Amplifiers produce by nature mechanical vibrations
and so disturb the flow of signals within the internal boards, cables,
electronic components and especially the sensitive tubes. These parts
are major on the easier side of the amplifier. So the 4TUBE absorbers
consists of 2 different types.
- 2 absorber with more soft damping
for the light side of the device results in an much better damping
factor in this critical area.
- 2 absorber with more hard damping placed on the heavy side.
Possible applications:
With the cork side under the feet of the device
directly under the base plate
furthermore as screw able version available M4/M6/M8.
The complex layer model from top to - down
• Cork Rubber mixture
• Massive Aluminum as separator
• Cork Rubber mixture
• Sorbothane
• Natural rubber
There is also the 4Tube-1 which is capable for tube amplifier up to 22kg
It will come in a elegant protective case as seen in picture
