
ExactPower EP15A
New Look! (silver & black available)
Old Look.
Review click HERE
The Details:
The ExactPower EP15A has, as you've probably already guessed, 15 Amps of current throughput capability from 8 (eight) full contact AC outlets. These outlets, by the way, are substantially better than mere 'hospital grade' devices which are tested only for their insulating qualities (resistance to electrical leakage) and not for contact area, conductor quality, or any other aspect that actually pertains to power delivery. The output voltage is set for the 120Vrms for the US models. The output will not vary beyond the 120Vrms +/-1%, when loaded from 1 amp to 15 amps.
The front panel has a two-line VFD to provide many functions. The output voltage is the default output, the reading can be changed to output current, output power, or a power indicator. In the event of a fault condition, the type of fault will be indicated. These fault conditions are "over voltage", under-voltage, over-temperature, and over-current. The output voltage, current, and power are measured in true rms, giving you accurate measurements of the power that is consumed.
The EP15A has microprocessor controls for most of its functions. If a fault occurs, the microprocessor monitors the condition and will automatically turn the unit back after the fault is eliminated. The protection will try to keep power to your equipment at much as possible, such as in over-current. In the event of over-current during an amplifier being powered up, the EP15A does not shut off, it automatically switches the outputs to the wall power. After the over-current event has passed, the EP15A switches the outputs back to regulated mode. This is all performed without user intervention.
The EP15A is ideal for complex systems or for the largest power amplifiers. Call us to find out why the EP15A is far superior to the competition's product for much less money.
Features
High power rating to weight ratio: We offer 15A of current in a 30 pound, two rack hight unit.
No current limiting: We do not limit the current ever. If the current demand goes beyond 46App, then we switch output to the wall. When the current demand drops below this, we automatically switch back to regulation
Tight voltage regulation: The output voltage is regulated to within 1% of 120Vrms, which is the US national standard for line voltage.
Patented technology: The advanced "feed-forward" technology found in the ExactPower voltage regulation products is protected by US Patent # 6, 653, 824.
Subcycle waveform correction: We correct the waveform virtually instantaneously. We do not sample the waveform or wait until the next cycle for correction. We correct the waveform in real time.
Wide bandwidth: Our bandwidth allows us to removes high frequency irregularities from the waveform. It is like a dynamic filter. We actively remove the aberrations, not filter them.
Digital Power Amp: The insertion amplifier is a High Efficiency, pulse width modulated, power amplifier.
Reduces THD over the power line: By having wide bandwidth and instantaneous correction, we automatically improve the THD of the waveform.
Improves current delivery: The nature of the technology stores the current and provides your equipment with the bursts of current that are needed in demanding audio and video systems.
Low output impedance: The output impedance is significantly lower than the impedance of the power delivered by the wall receptacle.
EMI and RFI filtering: Even the widest bandwidth electronics cannot eliminate all the EMI and RFI problems, therefore we have incorporated custom designed EMI and RFI filtering.
Eight "full contact" AC receptacles: We looked far and wide for the best receptacles, not just the so called "audiophile grade" receptacles. We found one that has large contact areas with a tight hold.
Detachable AC power cord: We decided early on that the buyer of our unit may have a favorite power cord that they wish to use. We have a standard 15A IEC connector on the rear of our unit.
Vacuum fluorescent display: The beautiful blue display can be seen from across the room, so the voltage, current, or power can be monitored.
Rack mount option: If you need to place this unit in a standard 19" rack, we can supply a set of brackets for this.
Specifications
Input voltage range: 90 to 135 Vrms
Nominal output voltage: 1 Amp to 15 Amps 120VRMS with 1% tolerance
Low-pass filter: Dynamic, not passive
Protection: Over Voltage, Over temperature, Over Current, Under Voltage
Peak repetitive output current: 46A peak to peak
Weight: 30 pounds
Dimensions: 17" wide x 3.50" high x 14.2" deep
Surge Protection: 300 Joules 6,500Amps
Other Options: 19" Rack-mount
Warranty info click HERE
Power capability depends on the quality of the electrical service feeding the AC outlet your ExactPower unit is plugged into. This includes the quality and load ratings of fuses and circuit breakers in the line, even the quality of the wiring.
The table below provides the information on the power delivery of the EP15A for a given line voltage.
If the AC at your wall socket is... The EP15A can produce...
120 volts 1,650 watts
115 volts 1,550 watts
110 volts 1,500 watts
105 volts 1,450 watts
100 volts 1,400 watts
95 volts 1,300 watts
Price: $2199 with FREE 6' Blue Dragon Power Cord
ExactPower SP15A
New Look! (silver & black available)
The Details:
Review click HERE
The ExactPower SP15A has been designed to isolate and reduce unwanted noise from your Audio Video equipment for improved picture and sound quality.
The ExactPower SP15A provides 15 Amps of balanced current. The voltage on the output receptacles is symmetrical around the earth ground. The "Line" and "Neutral" are of equal voltage and opposite polarity or phase. The voltage is 60Vac on each side of ground, so that the total output is 120Vac, which is the US standard.
The critical part of the SP15A is the design of the transformer. The type of transformer that is used is a toroidal transformer. This is the only type that can give the best results. The transformer must provide isolation, noise reduction, and inaudible acoustic noise. The transformer is wound with the bifilar method. This method reduces the noise that is present on both incoming "Line" and "Neutral". This noise is called "Common Mode Noise". An electrostatic shield is placed between the primary (input) side and the secondary (output) side of the transformer. This reduces noise by using a copper strip that is connected to the earth ground. High frequency noise, that is on the primary, is shunted to the shield and then to ground, so it never reaches your components. Precision winding provides for a consistent transformer. We utilize only the best materials.
We have two units to choose from, a unit without the EMI and RFI filters to be used with the EP15A, and a unit with the filters to be used as a stand alone product. Although the unit with filters can be used with the EP15A, the filters would be redundant since the EP15A incorporates these filters. The SP15A also incorporates filters for digital equipment on four of the receptacles. These filters block any digital noise that may be present on the power line of a digital product from contaminating other products powered by the SP15A.
Features
Oversized Custom Toroidal Transformer: Meticulously crafted transformer with electrostatic shield. Utilizing computer controlled winding machines to precisely place each winding for optimum noise rejection.
High Current High Frequency Filters: Filters to remove the digital noise from connected digital equipment.
Eight "full contact" AC receptacles: These receptacles are the same ones that are used in the EP15A. We use only the best Hubble receptacles.
EMI and RFI filtering: Even the widest bandwidth electronics cannot eliminate all the EMI and RFI problems, therefore we have incorporated custom designed EMI and RFI filtering. (Optional)
Specifications
Input Voltage: 120 Vrms Nominal
Nominal output voltage: 1 Amp to 15 Amps 120VRMS +0Vrms, -1Vrms
Inputs: Standard 15A IEC receptacle
Outputs: 8 Hubble NEMA receptacles
Output current: 15Arms from all outlets combined
Weight: 45 pounds
Dimensions: 17" wide x 3.50" high x 14.2" deep
Options: 19" Rack-mount
Price: $999 with FREE 6' Blue Dragon Power Cord
Add $100 for EMI/RFI Filters
Buyer is to pay shipping charges. I will accept Money Orders, Cashiers Checks or Personal checks. Free Paypal. See my other adds and my website for different Cable options and prices. Click info link below to access my website: [ www.moon-audio.com]
|