This is my Tandberg 3002A preamplifier that I purchased back in the mid eighties. It has been boxed and kept in the closet for the past 25+ years. I have all the original packaging and as you can see the unit is in mint condition expcept for cracked plastic "switched" power plug inlet on the rear of the unit. I cracked the housing when I tried to insert a polarized plug when they first came out back in the 80's.I tried the preamp today and it works and functions flawlessly; all switches, lights and controls operate smoothly and the preamp sounds great. AgoN feedback: "mbhcid" Specs: Features: Tape 1 & Tape 2 Play & Record Input/Outputs. The main input selector has the following options: Tuner, Phono MM, Phono MC and Digital Disk Product Manufacturer: Tandberg Factory, Norway Inputs: Phono MM: 2.0 mV (33/47/100 kOhms) Phono MC: 0.16 mV (1 kOhm) Radio: 140 mV (47 kOhm) AUX: 140 mV (47 kOhm) Tape Monitor I: 140 mV (47 kOhm) Tape Monitor II: 140 mV (47 kOhm)Tape recording outputs: RCA: 140 mV (tape I and tape II)Phono equalization: RIAA: + 0.2 dBTHD (1 kHz): <0004% (20 Hz to 20 kHz / 2 V)Intermodulation: no longer measurable (TIM)Frequency response: 5 Hz to 130 kHz (+ 0 / - 1.5 dB)Outputs: tape I and II tape: max. 7.5 V, AF-output: relative to 0004 %, THD max 5 V (clipping limit 10 V), impedance: 560 ohms (RCA).Headphones: max. Output voltage 20 V, source: 470 ohms, Headphone Impedance: 4 to 2000 ohms (US plug).Tone controls: bass at 50 Hz: + 10 dB, treble at 10 kHz: + 10 dBDimensions: 435 x 83 x 350 mm
| 
