I have two wonderful sounding Parasound 2125 version 1. They need a good home. They're both in a 9 out of 10. The first one I bought was a store demo that was never used it didn't come with the box or any packaging, but the power cable. I posted the pics the have light scratches on the demo. The demo amp has two light scratch marks, one the top and back panel. These aren't really noticeable but can be fixed. The second one I bought was brand new and came with a box. So one will come in the packaging and box. The second one will come packed well. Both amps will be insured for the sales price. There isn't anything wrong with the amps. They have a ton of power. I just recently updated to a balanced inputs with a new preamp and bought me a Parasound A21 for balanced inputs. The specs: Continuous RMS Power Output
20 Hz - 20 kHz, Both Channels Driven
125 watts x 2, 8 Ω
200 watts x 2, 4 Ω
200 watts x 2, 2 Ω
Continuous RMS Power Output
20 Hz - 20 kHz, Bridged Mono
400 watts, 8 Ω
400 watts, 4 Ω
Current Capacity
35 amps peak per channel
Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom
1.3 dB
Total Harmonic Distortion
0.025% at full rated output
0.015% at average listening levels
IM Distortion
0.05 %
Transient IM Distortion
Not measurable
S/N Ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance
33 k Ω
Input Sensitivity
1 V in for 28.28 V out, THX standard
Inter-Channel Crosstalk
85 dB, 1 kHz
73 dB, 10 kHz
67 dB, 20 kHz
Damping Factor
Over 150 at 20 Hz
Auto Turn On - DC
9 - 12V, 15 mA
Auto Turn On - Audio
1.2 mV - 12 mV, adjustable
15 minute turn off delay
AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
3 watts standby; 550 watts full output
Dimensions
17-1/4" Wide
16" Deep with connectors
4-1/4" High with feet, 3-1/2" panel only
437 x 406 x 107mm, 88.2mm panel only
Net Weight
27 lbs , 12.3 kg
Rack Mount Accessory
May be Purchased Separately
RMK22
|