(Wash DC-Metro Area Only)Hi All, I'm looking to sell a partially complete 4 Pi Build. I've abandoned the project mid-way. I was building a set for my parents, as I got closer to completion, my brother ended up gifting the pair that I gifted him several years back to my parents instead. I was contemplating completing the project, but I hit a snag. One of my JBL 2226H driver "buzzes" at low frequency (120hz and less). It may be the dust cap, it may be the coil. Don't know, but I don't plan on sinking any more money into the project. I currently have the following: Pair - 4Pi Cabinets - built with 18mm Baltic Birch Plywood - the enclosures were built taller and the horns were centered for aesthetic purposes. No standing wave issues with the tall cabinet - this was verified via impedance sweep and close-mic measurements. The enclosures were heavily braced and were finished with water-based poly. Pair - Wayne 4pi Horns Pair - Denovo DNA-360 compression drivers (apparently a direct clone of the DE250) Pair - JBL 2226H drivers, one works flawlessly, the other has a buzz at low frequency. Not sure what is a fair price, but I was thinking $400 for all of the above? I figured a used pair of Wayne horns will sell about $60ish, the Denovo drivers around $120-ish, a single JBL around 150-ish, and that asking $80 for a pair of completed cabinets with terminal cups + sound insulation, etc. is not unreasonable. No crossover components are included - but schematics are available directly from Wayne at no charge. I also had my own take on crossover because I thought about voicing them slightly differently than Wayne (not better - just different) - I can share that with interested parties.
| 
