The USB under Mac OSX and Linux , coaxial input without driver install necessary .
2，Recommend player in Windows : Foobar2000 V1.15 with plugs foo_out_ks & foo_out_wasapi
3，The stock USB cable is custom order have low impedance , can through enough current power supply for DI-V3, if users replace by other USB cable and power supply by USB, please make sure the USB cable have enough low impedance .
4，Don't setting the USB control panel higher than 24bit / 192KHz while applied coaxial output .
5，Better USB cable choice rule : Short length and good shield .
6，Advice the users who own audio-gd DACs had built in USB-32 don't want upgrade to the DI-V3 .Summarize
Built in 3 Groups Fully Discrete Class A power supplies so it can power supply by computer USB power .
Applies Current Conveyor Technology for coaxial output
USB Audio Class2 High-speed Input from Windows / MAC / Linux
Supports full speed Asynchronous Transfer Mode
USB conversion to I2S output support 16 / 24 / 32-Bit ， 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz , 352kHz , 384kHz ( Applied Firmware #3 , I2S transfer have not worldwide standard so have not warranty )
Coaxial input conversion to I2S output support up to 24Bit/192KHz
Coaxial output support 16 / 24-Bit ， 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Two model coaxial outputs * :
BNC (Applied Current Conveyor Technology)*
RCA (Class Transmit insulate ) View my seller Feedback on Audiogon
https://www.audiogon.com/users/dynobot/feedbacks
|
